Lone Wolf Parts Kit for Polymer 80 Reviews

  The lxxx% frame market is super hot right now. When Solitary Wolf came out with their eighty% Liberty Wolf frame, I definitely wanted to try building one up. Especially since I am a fan of their Timberwolf frames. The Freedom Wolf frame is noticeably different from other 80% kits on the market.

  Every bit with near 80% kits, the Freedom Wolf comes with the tools needed to make a complete stripped frame. These include: the "Stencil" or Jig every bit most call information technology, Drill bits, front and rear rail, rail caps, 2 backstraps, a magazine well, and adhesive. Yes, that last one is mucilage, don't worry, it works style better than I imagined it would. Having a flat and curved backstrap is a pretty squeamish option in an 80% frame kit, every bit is the removable magwell.

  At that place are instructions online on how to car/assemble the Freedom Wolf. And so I'll requite the quicker run downwards. Start, remove the piece of plastic where the locking block goes, just pull it out with pliers. Next remove the ii tabs, where the locking cake goes, with pliers. Then, VERY CAREFULLY, dremel the tabs down affluent with the within of the frame. This was probably the most tedious function for me to do. At present install the "Stencil" and put the whole thing in a vice. Drill the holes equally stated. Now dremel out the grit embrace pieces and the tabs in the recoil spring area.

  Now that that office is done, we movement onto the gluing of the rails. This is what seemed odd to me, but it worked out fine. In that location are 2 front rails and 2 rear rails, both with rail caps. The rear rails caps are left and right specific. Now get a small paint brush or two, steal them from your kids, or go purchase some. They will be unusable when finished. Pigment some of the supplied adhesive on the rail pockets. Slide the rails into these pockets with the rail facing out. And so apply more adhesive to the outside of the track, forth with some on the rail caps. Push button together firmly until the mucilage sets. Now wait 48 hours minimum before doing anything else with the frame. After that yous can assemble the frame. You'll need a parts kit with a locking block and a gen 4 mag catch. The gluing is different, but information technology works well.

  I ordered one of the Solitary Wolf parts kits for the Freedom Wolf. It's just easier since it comes with all the right parts for this frame. I installed the parts kit and put a gen 3 slide on the frame. Almost every time I would release the slide, the pistol would fire the striker. Or, if I slowly released the trigger, when it hit the reset, it would fire. Non good. I installed a different slide, which made information technology worse. The Lite Slide from Strike Industries seemed to piece of work the all-time on this frame. I then tried a unlike disconnector, that helped a little. Next a different trigger bar. You get the thought. Finally I had figured out which parts worked and which didn't. Afterwards hours, the pistol now functions correctly nigh 90% of the fourth dimension. It appears that the rear rails on the Freedom Wolf frame sit up college than they should. This causes the striker to not be held with as much surface expanse of the trigger bar. Causing information technology to autumn off when the slide is released. If the trigger housing pivot hole had been drilled off, by me, then the housing would ready upwards college, actually making this less of a problem. I did endeavour to bend the rear rails downward slightly, with no luck. But it did reinforce the fact that the adhesive is superlative notch stuff.

  Fifty-fifty with all of the problems I had, the pistol does shoot well. At least at present that I got it to somewhat piece of work properly. The frame is super comfortable. It is much smaller than the Polymer eighty or factory Glock frames. So people with smaller hands might similar this better. Of the 4 slides I tried on the Freedom Wolf, all fit snug with very picayune play.

  If you actually want to claiming yourself building an eighty% frame, the Freedom Wolf might be just the thing. I didn't have good luck with the one they sent out for review. At least nosotros know they didn't hand pick it. I understand information technology'south an 80% frame, I was just hoping for something that worked ameliorate. Solitary Wolf makes some crawly stuff. I dear my Timber Wolf complete frame. The Freedom Wolf, not then much. So go check out some of the other great stuff Lonely Wolf makes.

Firearms Insider Reviews - eight Key Points

Claim to Fame:

fourscore% compact Solitary Wolf frame - "Glock 19" size

Target Market place:

Anyone wanting to build their own pistol

FNBs (Features & Benefits of this product):

• Accepts Gen3 or Gen4 G19/23/32/38 slides (via grit encompass adapter)

• Fits in standard Glock® 19 holsters

• Extended beavertail designed to disperse recoil impulse

• Ambidextrous reversible Gen4 way magazine take hold of

• Undercut trigger baby-sit for college grip placement

• No finger grooves

• 2 back strap sizes

• Removable magwell

• Fixture, drills, glue, and slide track are all included

What other aesthetic options or finishes are available?

Nothing

What others are saying?:

3 Stars on MidwayUSA

needs a better jig

I bought this because of the slimmer grip and I wanted to see how the build process differed from that of the polymer80. the stencil every bit they call it, instead of jig, does in my opinion non hold the frame securely enough. as i drilled my holes I could run across the frame rocking in the stencil. I tin see at present that the locking cake pin hole is now more of an oval and when inserting a rod through the trigger pin pigsty I can run into it is not at a 90 caste angle to the frame. the build quick. the whole process merely took about ten min. that is by and large due to that fact the you lot don't demand to cut a channel for the guide rod and no cut off the actress polymer from the rail expanse. all in all it turned out ok, but should take a meliorate jig.

4 Stars on MidwayUSA

Overnice frame, parts support is lacking

The good: I really like the ergonomics and feel of this frame. I really like how it goes together - it is more like an OEM Glock and less like a Polymer 80. I take two Polymer 80 pistols and I like this one better. I like the jig. I followed the instructions including use of a drill press and drill press clench. It went great! I think it volition be awesome in one case I finish it. The bad: I've finished my frame, but I have yet to complete it because I cannot get lower parts. First, the locking block is a special part from Lone Wolf, role number LWD-4361. They are backordered from Lone Wolf and I tin't detect them anywhere else. A Glock 19 OEM locking block won't fit without modifying the frame in addition to what the instructions say. I emailed Lonely Wolf and recommended that I wait for their parts to be available, which might be a couple months. The mag release and trigger housing are Gen 4 parts, while the remaining parts are Gen 3. So, y'all can't buy a gen 3 parts kit and expect it to work. I am waiting for the backordered Lone Wolf parts kit that I ordered. In one case parts are available, I think these will be the best 80 per centum Glock lowers on the market.

Link to other reviews:

Nothing Plant

Cost indicate:

MSRP = $174.95

Retail = $149.95 at Brownells

I demand information technology now! Availability:

Lonely Wolf or Brownells

Our Rating:

Pros:

• Same size equally their TimberWolf frame

• Fits about Glock 19 holsters

• Drill bits and Jig included

• Comes with 2 size backstraps

• Comes with oversized magwell

• Gen three or iv slide compatibility

Cons:

• Non 100% Safety

• Jig doesn't fit well

• Needs a drill press instead of a hand drill

• Glue dries quickly during assembly

• Waiting 48 hours for glue to fully cure

Score: five.00 Mediocre

cansleruply1944.blogspot.com

Source: http://www.firearmsinsider.tv/gun-gear-reviews/2021/7/24/freedom-wolf-80-frame

Share this post